SMAP Enhanced L1C Radiometer Half-Orbit 9 km EASE-Grid Brightness Temperatures, Version 2

Data set id:

SPL1CTB_E

DOI: 10.5067/0DGGEWUC6MLY

Data Citation and Acknowledgment
As a condition of using these data, you must cite the use of this data set. Such a practice gives credit to data set producers and advances principles of transparency and reproducibility.

Chaubell, J., Chan, S., Dunbar, R. S., Peng, J. & Yueh, S. (2018). SMAP Enhanced L1C Radiometer Half-Orbit 9 km EASE-Grid Brightness Temperatures. (SPL1CTB_E, Version 2). [Data Set]. Boulder, Colorado USA. NASA National Snow and Ice Data Center Distributed Active Archive Center. https://doi.org/10.5067/0DGGEWUC6MLY. [describe subset used if applicable]. Date Accessed 12-12-2024.

Copied

Other standard citation formats may be found on the DOI Citation Formatter website.

Describing subset: When applicable, include the information a reader would need to extract the same subset at the end of your citation. If multiple or complex steps were incolved, it may be more appropriate to include this information in the paper itself.

See our Citation Policies for more details about how to structure your data citation.

There is a more recent version of these data.
Version Summary

Updated input SPL1BTB product with water correction applied, resulting in warmer TBs over land and cooler TBs over water.

For the full major and minor version history, go to https://nsidc.org/data/smap/version-history

Overview

This enhanced Level-1C (L1C) product contains calibrated, geolocated, brightness temperatures acquired by the Soil Moisture Active Passive (SMAP) radiometer during 6:00 a.m. descending and 6:00 p.m. ascending half-orbit passes. This product is derived from SMAP Level-1B (L1B) interpolated antenna temperatures. Backus-Gilbert optimal interpolation techniques are used to extract maximum information from SMAP antenna temperatures and convert them to brightness temperatures, which are posted to a 9 km Equal-Area Scalable Earth Grid, Version 2.0 (EASE-Grid 2.0) in three projections: global cylindrical, Northern Hemisphere azimuthal, and Southern Hemisphere azimuthal.

Parameter(s):

BRIGHTNESS TEMPERATURE

Platform(s):

SMAP

Sensor(s):

SMAP L-BAND RADIOMETER

Data Format(s):

HDF5

Temporal Coverage:

31 March 2015 to 27 August 2020

Temporal Resolution:

49 minute

Spatial Resolution:

9 km

9 km

Spatial Reference System(s):

WGS 84 / NSIDC EASE-Grid 2.0 North

EPSG:6931

WGS 84 / NSIDC EASE-Grid 2.0 South

EPSG:6932

WGS 84 / NSIDC EASE-Grid 2.0 Global

EPSG:6933

Spatial Coverage:

N:

85.044

S:

-85.044

E:

180

W:

-180

Blue outlined yellow areas on the map below indicate the spatial coverage for this data set.

View Metadata Record

Data Access & Tools

This data set has been retired. There is a more recent version of these data.

Documentation

Help Articles

General Questions & FAQs

How are the enhanced SMAP radiometer products generated and what are the benefits of using these products?

There is considerable overlap of the SMAP radiometer footprints, or Instantaneous Fields of View (IFOVs), which are defined by the contours where the sensitivity of the antenna has fallen by 3db from its maximum.

The following table describes both the required and actual latencies for the different SMAP radiometer data sets. Latency is defined as the time (# days, hh:mm:ss) from data acquisition to product generation.

This short article describes the customization services available for SMAP data using Earthdata Search.

How to Articles

Filter and order from a data set web page using the Data Access Tool

Many NSIDC DAAC data sets can be accessed using the NSIDC DAAC's Data Access Tool. This tool provides the ability to search and filter data with spatial and temporal constraints using a map-based interface.Users have the option to

To convert HDF5 files into binary format you will need to use the h5dump utility, which is part of the HDF5 distribution available from the HDF Group. How you install HDF5 depends on your operating system.

The following are instructions on how to import and geolocate SMAP Level-1C HDF5 data in ENVI. Testing notes Software: ENVI Software version: 5.3 and above. If using version 5.3, service pack 5.3.1 is needed. Platform: Windows 7

NASA Earthdata Cloud Data Access Guide

The NASA Earthdata Cloud is the NASA cloud-based archive of Earth observations. It is hosted by Amazon Web Services (AWS). Learn how to find and access NSIDC DAAC data directly in the cloud.

NSIDC DAAC Data Subscription Requests

Data subscriptions are available for select NSIDC DAAC data collections. Once signed up, the subscription service automatically sends you new data as they are delivered from active NASA satellite missions.

Programmatic Data Access Guide

All data from the NASA National Snow and Ice Data Center Distributed Active Archive Center (NSIDC DAAC) is directly accessible through our HTTPS file system using Wget or curl. This article provides basic command line instructions for accessing data using this method.

This article highlights the NSIDC DAAC data sets available with customization options and outlines a workflow for searching, ordering, and customizing data in NASA Earthdata Search. This approach is ideal for users who want to download data to their local machine.

NASA Worldview is a map interface that allows users to interactively browse imagery, create visualizations, and download the underlying data.

NASA's Global Imagery Browse Services (GIBS) provides up to date, full resolution imagery for selected NSIDC DAAC data sets.

Overview

Data Access & Tools

Documentation

User Guide

ATBDs

General Resources

Quality Assessment Reports

Product Specification Documents

Help Articles

General Questions & FAQs

How to Articles