Get Data


To learn more about Earthdata Login and to register for an account, please see How to Register with Earthdata Login. Once you have logged in, data can be downloaded via a Web browser, command line, or client. For help with downloading data, please see Options Available for Bulk Downloading Data from HTTPS with Earthdata Login.


Earthdata Search: NASA's newest search and order tool for subsetting, reprojecting, and reformatting data.
Data Set ID:

SMAP L2 Radar/Radiometer Half-Orbit 9 km EASE-Grid Soil Moisture, Version 3

This Level-2 (L2) soil moisture product provides estimates of global land surface conditions retrieved by both the Soil Moisture Active Passive (SMAP) radar and radiometer during 6:00 a.m. descending half-orbit passes. SMAP L-band backscatter and brightness temperatures are used to derive soil moisture data, which are then resampled to an Earth-fixed, global, cylindrical 9 km Equal-Area Scalable Earth Grid, Version 2.0 (EASE-Grid 2.0).

Version Summary:

Changes to this version include:

  • Transitioned to Validated-Stage 2
  • Uses SPL2SMA V3 Validated and SPL2SMP V3 Validated as input
  • Snapshot beta parameter estimation
  • Updated soil texture files (renormalized cases where sand+clay > 100%)
  • Updated default beta parameter

Geographic Coverage

  • Microwave > Brightness Temperature
  • Radar > Radar Backscatter > Sigma Nought
  • Soils > Soil Moisture/Water Content > Soil Moisture
Spatial Coverage:
  • N: 85.044, S: -85.044, E: 180, W: -180

Spatial Resolution:
  • 9 km x 9 km
Temporal Coverage:
  • 13 April 2015 to 7 July 2015
Temporal Resolution: 00:49:00
Data Format(s):
  • HDF5
Platform(s) SMAP Observatory
Version: V3
Data Contributor(s): Entekhabi, D., N. Das, E. G. Njoku, J. T. Johnson, and J. Shi.

Data Citation

As a condition of using these data, you must cite the use of this data set using the following citation. For more information, see our Use and Copyright Web page.

Entekhabi, D., N. Das, E. G. Njoku, J. T. Johnson, and J. Shi. 2016. SMAP L2 Radar/Radiometer Half-Orbit 9 km EASE-Grid Soil Moisture, Version 3. [Indicate subset used]. Boulder, Colorado USA. NASA National Snow and Ice Data Center Distributed Active Archive Center. doi: [Date Accessed].

Back to Top

Collapse All / Open All

Detailed Data Description

Parameter Description

Surface soil moisture (0-5 cm) in cm3/cm3 derived from brightness temperatures and sigma nought measurements is output on a fixed 9 km EASE-Grid 2.0.

Brightness temperature (TB) is a measure of the radiance of the microwave radiation welling upward from the top of the atmosphere to the satellite. The SMAP L-Band Radiometer measures four brightness temperature Stokes parameters: TH, TV, T3, and T4 at 1.41 GHz. TH and TV are the horizontally and vertically polarized brightness temperatures, respectively, and T3 and T4 are the third and fourth Stokes parameters, respectively.

Sigma nought (sigma0), or the backscatter coefficient, is a measure of the strength of radar signals reflected back to the instrument from a target, and is defined as per unit area on the ground. Usually expressed in dB, it is a normalized dimensionless number, comparing the strength observed to that expected from a defined area. The SMAP L-band Radar measures sigma0 using VV, HH, and HV transmit-receive polarizations, and uses separate transmit frequencies for the H (1.26 GHz) and V (1.29 GHz) polarizations. Sigma0 measurements are derived using Synthetic-Aperture Radar (SAR) processing.

Refer to the Data Fields document for details on all parameters.

Background color on

Data are in HDF5 format. For software and more information, including an HDF5 tutorial, visit the HDF Group's HDF5 Web site

Background color on
File Contents

As shown in Figure 1, each HDF5 file is organized into the following main groups, which contain additional groups and/or data sets:

Subset of file contents for SPL2SMAP
Figure 1. Subset of File Contents
For a complete list of file contents for the SMAP Level-2 radar/radiometer soil moisture product, refer to the Data Fields page. 

Data Fields

Each file contains the main data groups summarized in this section. For a complete list and description of all data fields within these groups, refer to the Data Fields document.

All data element arrays are one-dimensional with a size N, where N is the number of valid cells from the swath that appear on the grid.

Soil Moisture Retrieval Data

Includes combined radar and radiometer soil moisture data at 9 km resolution, ancillary data, and quality assessment flags.

Soil Moisture Retrieval Data 3 km

Includes combined radar and radiometer soil moisture data at 3 km resolution, ancillary data, and quality assessment flags. Soil moisture data retrieved in the 3 km group were acquired at nadir.

Metadata Fields

Includes all metadata that describe the full content of each file. For a description of all metadata fields for this product, refer to the Metadata Fields document.

Background color on
File Naming Convention

Files are named according to the following convention, which is described in Table 1:


For example:



Table 1. File Naming Conventions
Variable Description
SMAP Indicates SMAP mission data
L2_SM_AP Indicates specific product (L2: Level-2; SM: Soil Moisture; AP: Active/Passive)
[Orbit#] 5-digit sequential number of the orbit flown by the SMAP spacecraft when data were acquired. Orbit 00000 began at launch. Orbit numbers increment each time the spacecraft flies over the southernmost point in the orbit path.
D Descending half-orbit pass of the satellite (where satellite moves from North to South, and 6:00 a.m. is the local solar equator crossing time)
yyyymmddThhmmss Date/time in Universal Coordinated Time (UTC) of the first data element that appears in the product, where:
yyyymmdd 4-digit year, 2-digit month, 2-digit day
T Time (delineates the date from the time, i.e. yyyymmddThhmmss)
hhmmss 2-digit hour, 2-digit month, 2-digit second
RLVvvv Composite Release ID, where:
R Release
L Launch Indicator (1: Post-launch standard data)
V 1-Digit Major Version Number
vvv 3-Digit Minor Version Number
Example: R13171 indicates a standard data product with a version of 3.171. Refer to the SMAP Data Versions page for version information.
NNN Number of times the file was generated under the same version for a particular date/time interval (002: 2nd time)
.[ext] File extensions include:
.h5 HDF5 data file
.qa Quality Assurance file
.xml XML Metadata file
Background color on
File Size

Each half-orbit file is approximately 27 MB.

Background color on

The daily data volume is approximately 500 MB.

Background color on
Spatial Coverage

Coverage spans from 180°W to 180°E, and from approximately 85.044°N and 85.044°S. The gap in coverage at both the North and South Pole, called a pole hole, has a radius of approximately 400 km. The swath width is 1000 km, enabling nearly global coverage every three days.

Spatial Coverage Map

Figure 2 shows the spatial coverage of the SMAP L-Band Radar and Radiometer for one descending half orbit, which comprises one file of this data set.

Figure 2. Spatial Coverage Map displaying one descending half orbit of the SMAP L-Band Radar and Radiometer. The map was created using the Reverb | ECHO tool.

Background color on
Spatial Resolution

SMAP 3 km Synthetic Aperture Radar (SAR) backscatter data and 36 km radiometer brightness temperature data are combined using the SMAP Active-Passive algorithm to derive soil moisture data that are then gridded using the 9 km EASE-Grid 2.0 projection.

Background color on
Projection and Grid Description

EASE-Grid 2.0

These data are provided on the global cylindrical EASE-Grid 2.0 (Brodzik et al. 2012). Each grid cell has a nominal area of approximately 36 x 36 km2 regardless of longitude and latitude. The SPL2SMAP data product is posted on a 9 km EASE-Grid that is nested consistently with the 36 km brightness temperatures and 3 km radar backscatter cross-section data.

EASE-Grid 2.0 has a flexible formulation. By adjusting a single scaling parameter, a family of multi-resolution grids that nest within one another can be generated. The nesting can be adjusted so that smaller grid cells can be tessellated to form larger grid cells. Figure 3 shows a schematic of the nesting.

This feature of perfect nesting provides SMAP data products with a convenient common projection for both high-resolution radar observations and low-resolution radiometer observations, as well as for their derived geophysical products. For more on EASE-Grid 2.0, refer to the EASE-Grid 2.0 Format Description.

Perfect Nesting in EASE-Grid 2.0
Figure 3. Perfect Nesting in EASE-Grid 2.0
Background color on
Temporal Coverage

Coverage spans from 13 April 2015 through 07 July 2015.

Note: Temporal coverage for this data set is limited due to the premature failure of the SMAP L-Band Radar. On 07 July 2015, the radar stopped transmitting due to an anomaly involving the instrument's high-power amplifier (HPA). For details, refer to the SMAP News Release issued 02 September 2015 by the Jet Propulsion Laboratory (JPL).

Temporal Coverage Gaps

Satellite and Processing Events

Due to instrument maneuvers, data downlink anomalies, data quality screening, and other factors, small gaps in the SMAP time series will occur. Details of these events are maintained on two master lists:

SMAP On-Orbit Events List for Instrument Data Users
Master List of Bad and Missing Data

Background color on
Temporal Resolution

Each Level-2 half-orbit file spans approximately 49 minutes.

Background color on

Software and Tools

For tools that work with SMAP data, refer to the Tools Web page.

Background color on

Data Acquisition and Processing

Sensor or Instrument Description

For a detailed description of the SMAP instrument, visit the SMAP Instrument page at the Jet Propulsion Laboratory (JPL) SMAP Web site.

Background color on
Data Sources
Background color on
Theory of Measurements

The goal of SMAP mission is to combine the favorable attributes of SMAP L-Band Radar and Radiometer observations in terms of their spatial resolution and sensitivity to soil moisture, surface roughness, and vegetation in order to estimate soil moisture at a resolution of 10 km, and freeze-thaw state at a resolution of 1-3 km. Microwave radiometry and radar are well-established techniques for surface remote sensing. Combining passive and active sensors provides complementary information contained in the surface emissivity and backscatter signatures, which make it possible to obtain optimal accuracy of retrieved soil moisture at higher resolutions. Over land, it has been demonstrated that L-band radiometer and radar measurements both provide information to retrieve optimal soil moisture estimates (Das et al., 20112014, and 2015).

Background color on
Derivation Techniques and Algorithms

This section has been adapted from Entekhabi et al. 2012 and Das et al. 2014.

SPL2SMAP data are based on the merger of SMAP radiometer and radar data at two discrete grid resolutions: 36 km and 3 km, respectively. The Equal-Area-Scalable-Earth Grid (EASE-Grid) cells of the radiometer and radar products nest perfectly; refer to the Projection and Grid Description section of this document. Therefore, the SPL2SMAP 9 km soil moisture product has 16:1 and 1:9 correspondence with the radiometer and radar products, respectively. The grid definition used in the algorithms is illustrated in Fig. 2 of the ATBD. The baseline and optional algorithms disaggregate the coarse resolution radiometer brightness temperature product based on the spatial variation in high resolution radar backscatter. In addition, the algorithms require static and dynamic ancillary data. These ancillary data are resampled to the same EASE-Grid prior to ingest in the SPL2SMAP processing. The dynamic ancillary data used to retrieve soil moisture for a particular 9 km grid cell at a specific point in time are listed in the SMAP SPL2SMAP and SPL3SMAP output files for the benefit of end users.

Refer to the Data Fields document for a description of all data fields.

Baseline Algorithm

The SPL2SMAP baseline algorithm is based on the disaggregation of the radiometer brightness temperatures using the radar backscatter spatial patterns within the radiometer footprint. The spatial patterns need to account for the different levels of radar backscatter cross-section sensitivity to soil moisture, vegetation cover, and soil surface roughness. For this reason, the radar measurements within the radiometer footprint are scaled by parameters that are derived from the temporal fluctuations in the spatially averaged radar and radiometer measurements. The derivation of the parameters are physically possible because SMAP made coincident and constant look-angle radar and radiometer measurements; the co-variations at a coarse scale (radiometer grid scale) over specified periods of time (short relative to plant phenology) are mostly related to surface soil moisture changes rather than contributions of vegetation and surface roughness. These derived parameters from the radar and radiometer measurements addresses the high resolution variability of soil moisture within the coarse radiometer grid cell. However, the high resolution variability of vegetation and surface roughness with the coarse radiometer grid cell is addressed by the parameter derived using the high resolution snapshot co-pol and x-pol radar measurements.

The basis for the brightness temperature disaggregation based on radar measurements begins with relating the radiometer measurements with the radar backscatter cross-section measurements in a simple conceptual framework outlined in the Algorithm Theoretical Basis Document (ATBD) for this product (refer to Section 2: Physics of the Problem). Note: The analysis provided therein is meant to simply demonstrate the dependencies and it is not directly (such as algebraically) part of the baseline SPL2SMAP algorithm formulation.

Once the disaggregated brightness temperatures at 9 km and 3 km are produced, the Single Channel Algorithm (SCA)/Tau-Omega model is applied that uses high-resolution ancillary information at 9 km and 3 km to produce the SPL2SMAP product.

Formulation of the Baseline SPL2SMAP Algorithm

The SMAP L-band radiometer measures the natural microwave emission in the form of the brightness temperature (TB) of the land surface, while the L-band radar measures the energy backscattered (σ0) from the land surface after transmission of an electromagnetic pulse. On short time scales, an increase of surface soil moisture produces an increase in soil dielectric constant, which leads to a decrease in radiometer TB and an increase in radar backscatter, and vice-versa. Thus, over short time periods variations soil moisture cause TB and σ0 to be negatively correlated. This time period is generally shorter than the seasonal phenology of vegetation.

The land surface vegetation and surface roughness factors are expected to vary on time scales longer that those associated with soil moisture variability. However, over a short time periods the SMAP measured TB and σ0 are expected to have a linear functional relationship: TB = α + β x σ0. The unknown parameters α and β are dependent on the dominant vegetation and soil roughness characteristics. The TB polarization can either be or and the σ polarization is either vv or hh. The parameter β can be statistically estimated based on a time-series regression of pairs of SMAP radiometer TB and spatially-averaged radar data σ0 from successive observations of the same Earth grid cell. The parameter β, which represents the sensitivity of backscatter to changes in brightness temperature is highly dependent on vegetation characteristics. It is possible to categorize grid cells based on a radar vegetation index (RVI), which is directly proportional to the amount of vegetation on the land surface. RVI can be derived directly from SMAP radar measurements. Across low vegetation cover regions (low RVI), the changes in radiometer brightness temperature are also reflected in changes in radar backscatter, leading to large (negative) values of β. When the vegetation cover is dense and there is complete volume scattering from the vegetation canopy RVI reaches the upper limit of unity. For bare smooth surfaces, the cross-pol radar backscatter cross-section is insensitive to soil moisture and is much smaller than the co-pol values. This leads to a near-zero RVI.

The statistically-estimated parameter β is unique for each location since it is a sensitivity parameter relating TB and σ0 and it is a function of surface characteristics like the local vegetation cover and soil roughness for a particular period of time. The parameter varies seasonally as well as geographically. Therefore the time-series pairs of TB and σ0 are used for a location in the regression span a moving-window period over which vegetation phenology and surface characteristics can be considered constant. To develop the satellite-based active-passive algorithm further the relationship between TB and σ0 can also be conceptually evaluated at the 9 km scale within the radiometer footprint. At this scale brightness temperature is not available given the SMAP radiometer instrument resolution. In fact determining TB at this scale is the target of the algorithm and it is referred to as the disaggregated brightness temperature. The way to incorporate the effects of the variations of the regression parameters at the 9 km scale with respect to the coarser 36 km scale is to determine subgrid heterogeneity from high-resolution cross-polarization radar backscatter measurements. The methodology is described in Section 3.2 of the ATBD.

The performance of the brightness temperature disaggregation is heavily dependent on robust estimates of statistically estimated parameters, which are specific for a given location and reflect the local roughness and vegetation cover conditions. The parameters vary seasonally; therefore, the time-series pairs of TB and σ0 used for a location in the regression should be limited to a finite-length moving-window over which vegetation phenology can be considered constant. Depending on the dominant land cover vegetation, this may be as short as a few weeks for croplands and a few months for natural landscapes, especially those with evergreen (tropical or boreal) plant types. This translates to anywhere from two to about twenty or at most thirty pair of TB and σ0 for the regression analysis. The issue is further complicated by the fact that robust estimation is possible only if there is adequate soil moisture variation within the window period (drydown or wetting event) to cause variations in both TB and σ0.  Estimates of β are based on the β-RVI relationships that are established over time. Observations from airborne field experiments show that RVI is indeed a unique and reliable estimator of β. More importantly, RVI isolates the impact of vegetation and separates the effect of surface roughness. From this point tau-omega (τ-ω) brightness temperature retrieval algorithms with considerable heritage can be used to retrieve surface soil moisture.

Algorithm Process Flow

Figure 4 is a simplified depiction of process flow for the current SPL2SMAP baseline algorithm. The process flow diagram captures important processes that involve input data streams and static and ancillary data used in the algorithm to generate the SPL2SMAP soil moisture product. The brightness temperatures at 9 km are converted to soil moisture using algorithms described in SPL2SMP, but based on 9 km resolution ancillary data. Note that the disaggregation is not performed if the coarse resolution brightness temperature does not meet the quality requirements, especially if large water bodies and RFI are present.

Figure 4. Process Flow Diagram of the Baseline SPL2SMAP Algorithm

Background color on
Processing Steps

This product is generated by the SMAP Science Data Processing System (SDS) at the Jet Propulsion Laboratory (JPL) in Pasadena, California USA. To generate this product, the processing software ingests the 6:00 a.m. descending half-orbit files of the SMAP SPL2SMA and SPL2SMP products. The brightness temperature available in SPL2SMP is corrected from the presence of waterbodies (up to 0.05 fraction) and then used in SPL2SMAP product generation. Beyond waterbody fraction of 0.05, no correction is conducted as it introduces high errors due to uncertainty present in the water fraction information. The SPL2SMAP product generation process also uses the ancillary data, as well as the quality and surface flags from the SPL2SMA and SPL2SMP products. To generate the standard SPL2SMAP product, the processing software ingests the 6:00 a.m. descending half-orbit files of the SPL2SMA and SPL2SMP data. The ingested data are then inspected for retrievability criteria according to input data quality, ancillary data availability, and land cover conditions. When retrievability criteria are met, the software invokes the baseline retrieval algorithm to generate soil moisture retrieval. Only cells that are covered by the swath are written in the product.

Background color on
Error Sources

Errors in SPL2SMAP data come from various sources with the most prominent potential error source being anthropogenic Radio Frequency Interference (RFI). Principally from ground-based surveillance radars and ancillary data, RFI can contaminate both radar and radiometer measurements at L-band. Early measurements and results from European Space Agency's Soil Moisture and Ocean Salinity (SMOS) mission indicate RFI is a major source of concern because of high RFI present and detectable in many parts of the world. The SMAP radar and radiometer electronics and algorithms include design features to mitigate the effects of RFI. The SMAP radar utilized selective filters and an adjustable carrier frequency to tune to predetermined RFI-free portions of the spectrum while on orbit. The SMAP radiometer implements a combination of time and frequency diversity, kurtosis detection, and use of T4 thresholds to detect and, where possible, mitigate RFI. Owing to such robust measures in the SMAP radiometer and radar hardware and data processing, the SPL2SMAP product has lesser impact than SMOS measurements from anthropogenic RFI. Other sources of error, such as disaggregation process errors and calibration and gridding errors, are quantified analytically for the disaggregated brightness temperatures and retrieved soil moisture at 9 km and 3 km. (Entekhabi et al. 2012 and Das et al. 2015)

More information about error sources is provided in Section 4.3: Error Budget of Baseline Algorithm of the ATBD.

Background color on
Quality Assessment

For in-depth details regarding the quality of these Version 3 data, refer to the following report:
Beta Assessment Report

Quality Overview

SMAP products provide multiple means to assess quality. Each product contains bit flags, uncertainty measures, and file-level metadata that provide quality information. For information regarding the specific bit flags, uncertainty measures, and file-level metadata contained in this product, refer to the Data Fields and Metadata Fields documents.

Each HDF5 file contains metadata with Quality Assessment (QA) metadata flags that are set by the Science Data Processing System (SDS) at the JPL prior to delivery to NSIDC. A separate metadata file with an .xml file extension is also delivered to NSIDC with the HDF5 file; it contains the same information as the HDF5 file-level metadata.

A separate QA file with a .qa file extension is also associated with each data file. QA files are ASCII text files that contain statistical information in order to help users better assess the quality of the associated data file.

If a product does not fail QA, it is ready to be used for higher-level processing, browse generation, active science QA, archive, and distribution. If a product fails QA, it is never delivered to NSIDC DAAC.

Data Flags

Quality control (QC) is an integral part of the SPL2SMAP processing. The QC steps of SPL2SMAP processing are based on the flags that are provided with the input data streams (SPL2SMP, and SPL2SMA), different types of masks, flags, and fractional coverage of other variables provided by ancillary data. The SPL2SMAP will process all data that have favorable conditions for soil moisture retrieval (VWC <= 5 kg/m2, no rain, no snow cover, no frozen ground, no RFI, sufficient distance from open water). However, soil moisture retrieval will also be conducted for regions with VWC > 5, rain, RFI repaired data, and places closer to water bodies, but appropriate flags are added to these data points indicating their susceptibility to potentially high errors. The product specification table provided in Section 6 of the ATBD elaborates the fields for QC bit flags. A flow diagram in Fig. 39 of the ATBD illustrates the decision tree to perform SPL2SMAP retrieval. As shown in Fig. 39, the SPL2SMAP processing involves merging of two data stream i.e., SPL2SMP and SPL2SMA. Therefore, the QC of SPL2SMAP output is influenced by these input data streams. In other words, the QC flags of SPL2SMAP output are the union of QC flags from SPL2SMP and SPL2SMA data streams. However, due to differences in spatial resolution of the (SPL2SMAP), the assignment of QC flags in SPL2SMAP may differ from the flags associated with the inputs. The thresholds of ancillary data that initiate flagging in the SPL2SMAP product are mentioned below. For example, TB data in SPL2SMP are corrected for the presence of water bodies. Studies are being conducted to assess the quality of corrected TB  data that are acceptable and within the desired uncertainty level that could be used in SPL2SMAP processing. Preliminary assessment shows that 5% waterbodies fraction within the 36 km grid cell of SPL2SMP has acceptable quality and have low error level in degree Kelvins. All the 9 km nested grid cells of SPL2SMAP within the 36 km grid cell of SPL2SMP are flag for suspected quality if the waterbodies fraction is >5%. The water body fraction is reported for all land-based 9 km grid cells in SPL2SMAP product file, and the water body flag bit is set in the retrieval quality field if the water body fraction is greater than a threshold value of 5%. In the case of VWC, SPL2SMAP retrieval is performed at all the grid cells irrespective of VWC but QC flag set only for grid cell having VWC >5 kg/m2. Retrievals are performed for SPL2SMAP grid cells that are associated with RFI and water body fraction above a particular threshold; however, appropriate QC flags are raised to inform the user about the suspected quality of disaggregated brightness temperature and retrieved soil moisture. No retrievals are performed over frozen ground, presence of snow, and 100% urban fraction. Thresholds from masks that will initiate flags and operational decisions to process SPL2SMAP product are mentioned as follows:

Open Water Body Flag

Open water fraction is determined from SMAP high-resolution radar and/or a priori information on permanent open freshwater from the Moderate Resolution Imaging Spectroradiometer (MODIS) MOD44W database. The SPL2SMAP Version 3 product uses the MOD44W database due to the maturity of the SMAP radar open-water algorithm and availability of radar measurements. This information is used to flag grid cells during soil moisture retrieval processing in the following way:

  • Water fraction is 0.00–0.05: Retrieve soil moisture, do not flag.
  • Water fraction is 0.05–0.10: Flag and retrieve soil moisture.
  • Water fraction is 0.10–1.00: Flag but do not retrieve soil moisture.
RFI Flag

Presence of RFI in the SMAP brightness temperature and radar backscatter data adversely affects the SMAP Active-Passive algorithm. Therefore specific logics are built into the SMAP Active-Passive processor to initiate flag during soil moisture retrievals. The RFI flag is initiates as follows:

  • No RFI detected in TB and σ0: Retrieve soil moisture, do not flag.
  • RFI detected in TB and repaired: Flag and retrieve soil moisture.
  • RFI detected in σ0 and repaired: Flag and retrieve soil moisture.
  • RFI detected in TB and not repaired: Flag and do not retrieve soil moisture.
  • RFI detected in σ0 and not repaired: Flag and do not retrieve soil moisture.
Snow Flag

The ancillary data that provide a binary indicator for presence of snow is used for flagging in the following way:

  • Snow data indicates no snow is present in the cell: Retrieve soil moisture and do not flag.
  • Snow data indicates any amount of snow is present in the cell: Flag, do not retrieve soil moisture.
Precipitation Flag

Presence of heavy rainfall during SMAP data acquisition may adversely affect the TB and σ0 measurements. The precipitation data from Global Modeling and Assimilation Office (GMAO) is used to flag the 9 km and 3 km grid cells. SPL2SMAP retrievals will be performed irrespective of rainfall; however, the grid cell will be flagged in case of the presence of precipitation.

VWC Flag

SPL2SMAP retrievals are conducted for all the locations irrespective of VWC level. The grid cells are flagged for VWC greater than 5 kg/m2.

Urban Area Flag

Presence of urban area adversely affects the L-band radiometric measurements. The presence of urban area within the SMAP measurement is likely to bias soil moisture retrievals. Currently the SPL2SMAP processor flag the regions having urban area as follows:

  • Urban fraction is 0.00–0.25: Retrieve soil moisture, do not flag.
  • Urban fraction is 0.25 - < 1.0: Flag and retrieve soil moisture.
  • Urban fraction is = 1.0: Flag but do not retrieve soil moisture.
Mountain Area Flag

Statistics of mountainous regions are used to initiate flags and operational decisions during SPL2SMAP processing. The standard deviation of slope is used as a threshold to detected uneven terrain and mountainous regions. For QC related to mountainous regions, the SPL2SMAP processing is consistent with the SPL2SMP and SPL2SMA processing. Currently the SPL2SMAP processor flags any region where DEM slope standard deviation is more than three degrees. However, retrievals are performed for all locations.

For more information regarding data flags, refer to the Data Fields document.

Background color on

References and Related Publications

Contacts and Acknowledgments


Dara Entekhabi, Narendra Das, Eni Njoku
Jet Propulsion Laboratory
California Institute of Technology
Pasadena, CA 91109 USA

Joel Johnson
Ohio State University
Columbus, OH 43210 USA

Jiancheng Shi
University of California
Santa Barbara, CA

Document Information

Document Creation Date

October 2015

Document Revision Date

April 2016


What data subsetting, reformatting, and reprojection services are available for SMAP data?
The following table describes the data subsetting, reformatting, and reprojection services that are currently available for SMAP data via the NASA Earthdata Search tool. Short name Title Subsetting... read more

How To

How do I programmatically request data services such as subsetting, reformatting, and reprojection using an API?
The subsetting, reformatting, and reprojection services provided by NSIDC through NASA Earthdata Search can also be accessed programmatically as a synchronous REST interface. This programmatic access is provided via an HTTPS URL containing a series of... read more
How to import and geolocate SMAP Level-1C and Level-2 data in ENVI
The following are instructions on how to import and geolocate SMAP Level-1C HDF5 data in ENVI. Testing notes Software: ENVI Software version: 5.3 Platform: Windows 7 Data set: SMAP L1C Radiometer Half-Orbit 36 km EASE-Grid Brightness Temperatures (... read more
How do I search, order, and customize SMAP data using Earthdata Search?
The attached video tutorial (.mp4) and document (.pdf) provide step-by-step instructions on how to search, order, and customize SMAP data using Earthdata Search ( NASA Earthdata search... read more