For a list of known issues with this product, see the Known Issues document under the Technical References tab.
VERSION 3: Selected granules for ATL03 and associated products (ATL04, ATL06, ATL07, ATL08, ATL09, ATL10, ATL12, ATL13) have been recalled and will be released at a later time. For a list of recalled data, see the 'Retracted Data File List' document under Technical References.
Technical difficulties are preventing the processing of new data files. At this time we do not have an estimated time for resolution. We apologize for any inconvenience and thank you for your patience. 
Data Set ID:
ATL09

ATLAS/ICESat-2 L3A Calibrated Backscatter Profiles and Atmospheric Layer Characteristics, Version 4

This data set (ATL09) contains calibrated, attenuated backscatter profiles, layer integrated attenuated backscatter, and other parameters including cloud layer height and atmospheric characteristics obtained from the data. The data were acquired by the Advanced Topographic Laser Altimeter System (ATLAS) instrument on board the Ice, Cloud and land Elevation Satellite-2 (ICESat-2) observatory.

This is the most recent version of these data.

Version Summary:

Changes for this version include:

  • Erroneous blowing snow detection was fixed by using an updated ANC30 (NOAA snow/ice maps) file.
  • Added new control parameters demtol1 and demtold2 and low-rate segment_id.
  • Modified blow_snow to accommodate the new surface signal changes.
  • Replaced DDA constant layer_sep with the new constant min_layer_sep.
  • Changed values for phi_ocean, asl_cal_factor and snow_age
  • Changed the low rate blowing snow implementation to select the profiles used based on wind speed and proper relation to the time of low-rate data.
  • Fixed the computation error in total column optical depth to take the cosine of tilt_angle in radians rather than degrees.
  • Implemented surface returns based on density, a replacement algorithm for Cloud/Aerosol Determination and detected ground as a layer when computing density algorithm cloud layer confidence
  • Improved the algorithm that removes ground surface from cloud layers.
  • Added 400 shots to the theoretical background equation.
  • Removed unused constant grd_search_width and added new constant min_layer_sep.
  • Remove references to GMTED in dem_h and dem_flag.

COMPREHENSIVE Level of Service

Data: Data integrity and usability verified; data customization services available for select data

Documentation: Key metadata and comprehensive user guide available

User Support: Assistance with data access and usage; guidance on use of data in tools and data customization services

See All Level of Service Details

Parameter(s):
  • CLOUDS > CLOUD PROPERTIES
  • LIDAR > LIDAR BACKSCATTER
Data Format(s):
  • HDF5
Spatial Coverage:
N: 90, 
S: -90, 
E: 180, 
W: -180
Platform(s):ICESat-2
Spatial Resolution:
  • 280 m
Sensor(s):ATLAS
Temporal Coverage:
  • 13 October 2018
Version(s):V4
Temporal Resolution91 dayMetadata XML:View Metadata Record
Data Contributor(s):Steve Palm, Yeukui Yang, Ute Herzfeld, David Hancock, Kristine Barbieri, et al

Geographic Coverage

Other Access Options

Other Access Options

Close

As a condition of using these data, you must cite the use of this data set using the following citation. For more information, see our Use and Copyright Web page.

Palm, S. P., Y. Yang, U. C. Herzfeld, D. Hancock, K. A. Barbieri, J. Wimert, and the ICESat-2 Science Team. 2021. ATLAS/ICESat-2 L3A Calibrated Backscatter Profiles and Atmospheric Layer Characteristics, Version 4. [Indicate subset used]. Boulder, Colorado USA. NASA National Snow and Ice Data Center Distributed Active Archive Center. doi: https://doi.org/10.5067/ATLAS/ATL09.004. [Date Accessed].

It appears your Web browser is not configured to display PDF files. Download adobe Acrobat or click here to download the PDF file.

How To

Programmatic Data Access Guide
Data from the NASA National Snow and Ice Data Center Distributed Active Archive Center (NSIDC DAAC) can be accessed directly from our HTTPS file system or through our Application Programming Interface (API). Our API offers you the ability to order data using specific temporal and spatial filters... read more
ICESat, IceBridge, and ICESat-2: A primer on data access across the three missions
This guide will provide an overview of the altimetry measurements and data sets across the missions, as well as a guide for accessing the data through NASA Earthdata Search and programmatically using an Application Programming Interface (API). Overview  The NASA ICESat, Operation IceBridge, and... read more
Explore, Access, and Customize ICESat-2 data at the NASA NSIDC DAAC
This webinar introduces the ICESat-2 mission and shows you how to explore, access and customize ICESat-2 data with the OpenAltimetry application, using NSIDC DAAC tools, and shows you how to subset, reformat and analyze the data using Python. This webinar was originally presented on July 23, 2019... read more
Search, order, and customize NSIDC DAAC data with NASA Earthdata Search
NASA Earthdata Search is a map-based interface where a user can search for Earth science data, filter results based on spatial and temporal constraints, and order data with customizations including re-formatting, re-projecting, and spatial and parameter subsetting. Thousands of Earth science data... read more
Filter and order from a data set web page
Many NSIDC data set web pages provide the ability to search and filter data with spatial and temporal contstraints using a map-based interface. This article outlines how to order NSIDC DAAC data using advanced searching and filtering.  Step 1: Go to a data set web page This article will use the... read more
How do I convert an HDF5/HDF-EOS5 file into binary format?
To convert HDF5 files into binary format you will need to use the h5dump utility, which is part of the HDF5 distribution available from the HDF Group. How you install HDF5 depends on your operating system. Full instructions for installing and using h5dump on Mac/Unix and... read more

FAQ

What subsetting and reformatting services are available for ICESat-2 data?
The following table describes the subsetting and reformatting services that are currently available for ICESat-2 data via the NASA Earthdata Search tool, along with ... read more