Data Set ID:
SPL3SMP

SMAP L3 Radiometer Global Daily 36 km EASE-Grid Soil Moisture, Version 5

This Level-3 (L3) soil moisture product provides a composite of daily estimates of global land surface conditions retrieved by the Soil Moisture Active Passive (SMAP) passive microwave radiometer. SMAP L-band soil moisture data are resampled to a global, cylindrical 36 km Equal-Area Scalable Earth Grid, Version 2.0 (EASE-Grid 2.0).

Version Summary:

Changes to this version include:

  • Level-1B water-corrected brightness temperatures are used in passive soil moisture retrieval. This procedure corrects for anomalous soil moisture values seen near coastlines in the previous version and should result in less rejected data due to waterbody contamination. Five new data fields accommodate this correction: grid_surface_status, surface_water_fraction_mb_h, surface_water_fraction_mb_v, tb_h_uncorrected, and tb_v_uncorrected.
  • Improved depth correction for effective soil temperature used in passive soil moisture retrieval; new results are captured in the surface_temperature data field. This correction reduces the dry bias seen when comparing SMAP data to in situ data from the core validation sites.
  • Frozen ground flag updated to reflect improved freeze/thaw detection algorithm, providing better accuracy; new results are captured in bit 7 of surface_flag.

Get Data

DOWNLOADING DATA VIA HTTPS

An Earthdata Login account is required to access these data. Please visit the Earthdata Login registration page to register for an account. Once you have logged in, data can be downloaded via a Web browser, command line, or client. For help with downloading data, please see Options Available for Bulk Downloading Data from HTTPS with Earthdata Login.

HTTPS

Worldview: This application allows you to interactively browse global satellite imagery within hours of it being acquired. You can also save it, share it, and download the underlying data.
Earthdata Search: NASA's newest search and order tool for subsetting, reprojecting, and reformatting data.
Subscription Service: Subscribe to have new data automatically sent when the data become available.

Geographic Coverage

COMPREHENSIVE Level of Service

Data: Data integrity and usability verified; data customization services available for select data

Documentation: Key metadata and comprehensive user guide available

User Support: Assistance with data access and usage; guidance on use of data in tools and data customization services

See All Level of Service Details

Parameter(s):
  • Microwave > Brightness Temperature
  • Soils > Soil Moisture/Water Content > Soil Moisture
Spatial Coverage:
  • N: 85.044, S: -85.044, E: 180, W: -180

Spatial Resolution:
  • 36 km x 36 km
Temporal Coverage:
  • 31 March 2015
Temporal Resolution: 1 day
Data Format(s):
  • HDF5
Platform(s) SMAP Observatory
Sensor(s): SMAP L-BAND RADIOMETER
Version: V5
Data Contributor(s): O'Neill, P. E., S. Chan, E. G. Njoku, T. Jackson, and R. Bindlish.

Data Citation

As a condition of using these data, you must cite the use of this data set using the following citation. For more information, see our Use and Copyright Web page.

O'Neill, P. E., S. Chan, E. G. Njoku, T. Jackson, and R. Bindlish. 2018. SMAP L3 Radiometer Global Daily 36 km EASE-Grid Soil Moisture, Version 5. [Indicate subset used]. Boulder, Colorado USA. NASA National Snow and Ice Data Center Distributed Active Archive Center. doi: https://doi.org/10.5067/ZX7YX2Y2LHEB. [Date Accessed].

Back to Top

Collapse All / Open All

Detailed Data Description

Parameter Description

Surface soil moisture (0-5 cm) in m3/m3 derived from brightness temperatures (TBs) is output on a fixed global 36 km EASE-Grid 2.0. Also included are brightness temperatures in kelvin representing the weighted average of Level-1B brightness temperatures whose boresights fall within a 36 km EASE-Grid 2.0 cell.

Refer to the Data Fields document for details on all parameters.

Background color on
Format

Data are in HDF5 format. For software and more information, including an HDF5 tutorial, visit the HDF Group's HDF5 website.

Background color on
File Contents

As shown in Figure 1, each HDF5 file is organized into the following main groups, which contain additional groups and/or data sets:

Figure 1. Subset of File Contents
For a complete list of file contents for the SMAP Level-3 radiometer soil moisture product, refer to the Data Fields page. 

Data Fields

Each file contains the main data groups summarized in this section. For a complete list and description of all data fields within these groups, refer to the Data Fields document.

All data element arrays are two-dimensional, with the exception of landcover_class and landcover_class_fraction, which are three-dimensional arrays.

Soil Moisture Retrieval Data_AM

Includes soil moisture data, ancillary data, and quality assessment flags for each descending half-orbit pass of the satellite [where the satellite moves from North to South and 6:00 a.m. is the Local Solar Time (LST) at the equator].

Soil Moisture Retrieval Data PM

Includes soil moisture data, ancillary data, and quality assessment flags for each ascending half-orbit pass of the satellite (where the satellite moves from South to North and 6:00 p.m. is the LST at the equator).

Corrected brightness temperatures are also provided for each AM and PM groupFor these brightness temperatures (such as tb_3_corrected), an additional procedure has been applied to correct for anomalous water and land values. Further details are provided in the Water/Land Contamination Correction section of the SPL2SMP user guide. (SPL2SMP data are used as input for this product). 

Metadata Fields

Includes all metadata that describe the full content of each file. For a description of all metadata fields for this product, refer to the Metadata Fields document.

Background color on
File Naming Convention

Files are named according to the following convention, which is described in Table 1:

SMAP_L3_SM_P_yyyymmdd_RLVvvv_NNN.[ext]

For example:

SMAP_L3_SM_P_20170117_R14010_001.h5

Where:

Table 1. File Naming Conventions
Variable Description
SMAP Indicates SMAP mission data
L3_SM_P Indicates specific product (L3: Level-3; SM: Soil Moisture; P: Passive)
yyyymmdd 4-digit year, 2-digit month, 2-digit day of the first data element that appears in the product.
RLVvvv Composite Release ID (CRID), where:
R Release
L Launch Indicator (1: post-launch standard data)
V 1-Digit Major CRID Version Number
vvv 3-Digit Minor CRID Version Number
Refer to the SMAP Data Versions page for version information.
NNN Product Counter: Number of times the file was generated under the same version for a particular date/time interval (002: second time)
.[ext] File extensions include:
.h5 HDF5 data file
.qa Quality Assurance file
.xml XML Metadata file
Background color on
File Size

Each file is approximately 24 MB.

Background color on
Volume

The daily data volume is approximately 24 MB.

Background color on
Spatial Coverage

Coverage spans from 180°W to 180°E, and from approximately 85.044°N and 85.044°S for the global EASE-Grid 2.0 projection. The gap in coverage at both the North and South Pole, called a pole hole, has a radius of approximately 400 km. The swath width is approximately 1000 km, enabling nearly global coverage every two to three days.

Background color on
Spatial Resolution

The native spatial resolution of the radiometer footprint is 36 km. Data are then gridded using the 36 km EASE-Grid 2.0 projection.

Background color on
Projection and Grid Description

EASE-Grid 2.0


These data are provided on the global cylindrical EASE-Grid 2.0 (Brodzik et al. 2012). Each grid cell has a nominal area of approximately 36 x 36 km2 regardless of longitude and latitude. Using this projection, all global data arrays have dimensions of 406 rows and 964 columns.

EASE-Grid 2.0 has a flexible formulation. By adjusting a single scaling parameter, a family of multi-resolution grids that nest within one another can be generated. The nesting can be adjusted so that smaller grid cells can be tessellated to form larger grid cells. Figure 2 shows a schematic of the nesting.

This feature of perfect nesting provides SMAP data products with a convenient common projection for both high-resolution radar observations and low-resolution radiometer observations, as well as for their derived geophysical products. For more on EASE-Grid 2.0, refer to the EASE-Grid 2.0 Format Description.

Figure 2. Perfect Nesting in EASE-Grid 2.0
Background color on
Temporal Coverage

Coverage spans from 31 March 2015 to present.

Temporal Coverage Gaps

Satellite and Processing Events

Due to instrument maneuvers, data downlink anomalies, data quality screening, and other factors, small gaps in the SMAP time series will occur. Details of these events are maintained on two master lists:

SMAP On-Orbit Events List for Instrument Data Users
Master List of Bad and Missing Data

Latencies

FAQ: What are the latencies for SMAP radiometer data sets?

Background color on
Temporal Resolution

Each Level-3 file is a daily composite of half-orbit files/swaths. Note that data from descending passes (a.m.) and ascending passes (p.m.) are stored separately in the same daily composite granule.

Background color on

Software and Tools

For tools that work with SMAP data, see the Tools web page.

Background color on

Data Acquisition and Processing

This section has been adapted from O'Neill et al. 2016.

Sensor or Instrument Description

For a detailed description of the SMAP instrument, visit the SMAP Instrument page at the Jet Propulsion Laboratory (JPL) SMAP website.

Background color on
Data Source

SMAP Level-3 radiometer soil moisture data (SPL3SMP) are composited from SMAP L2 Radiometer Half-Orbit 36 km EASE-Grid Soil Moisture, Version 5 (SPL2SMP).

Background color on
Theory of Measurements

The microwave portion of the electromagnetic spectrum, which includes wavelengths from a few centimeters to a meter, has long held the most promise for estimating surface soil moisture remotely. Passive microwave sensors measure the natural thermal emission emanating from the soil surface. The variation in the intensity of this radiation depends on the dielectric properties and temperature of the target medium, which for the near-surface soil layer is a function of the amount of moisture present. Low microwave frequencies, at L-band or approximately 1 GHz, offer the following additional advantages:

  • The atmosphere is almost completely transparent, providing all-weather sensing
  • Transmission of signals from the underlying soil is possible through sparse and moderate vegetation layers (up to at least 5 kg/m2 of vegetation water content)
  • Measurement is independent of solar illumination which allows for day and night observations

For an in-depth description of the theory of these measurements, refer to Passive Remote Sensing of Soil Moisture in the Algorithm Theoretical Basis Document (ATBD) for this product, O'Neill et al. 2018.

Background color on
Derivation Techniques and Algorithms

The SMAP Level-3 radiometer soil moisture is a daily gridded composite of the SMAP L2 Radiometer Half-Orbit 36 km EASE-Grid Soil Moisture, Version 5 (SPL2SMP). The derivation of soil moisture from SMAP brightness temperatures occurs in the Level-2 processing.

Refer to the Derivation Techniques section in the SPL2SMP user guide for details on algorithms and ancillary data.

Background color on
Processing Steps

The SPL3SMP product is a daily global product. To generate the product, individual SPL2SMP half-orbit files acquired over one day are composited to produce a daily multi-orbit global map of retrieved soil moisture.

The SPL2SMP swaths overlap poleward of approximately +/- 65° latitude. Where overlap occurs, three options were considered for compositing multiple data points at a given grid cell:

  1. Use the most recent (or last-in) data point
  2. Take the average of all data points within the grid cell
  3. Choose the data points observed closest to 6:00 a.m. Local Solar Time (LST) for observations derived from SMAP descending passes and closest to 6:00 p.m. LST for observations derived from SMAP descending passes

The current approach for the SPL3SMP product is to use the nearest 6:00 a.m. LST and nearest 6:00 p.m. LST criteria to perform Level-3 compositing separately for descending and ascending passes, respectively. According to these criteria, for a given grid cell, an L2 data point acquired closest to 6:00 a.m. LST or closest to 6:00 p.m. LST will make its way to the final Level-3 file; other late-coming L2 data points falling into the same grid cell will be ignored. For a given L2 half-orbit granule whose time stamp (yyyymmddThhmmss) is expressed in UTC, only the hhmmss part is converted into local solar time. (O'Neill et al. 2016)

Background color on
Error Sources

Anthropogenic Radio Frequency Interference (RFI), principally from ground-based surveillance radars, can contaminate both radar and radiometer measurements at L-band. The SMAP radar and radiometer electronics and algorithms include design features to mitigate the effects of RFI. The SMAP radiometer implements a combination of time and frequency diversity, kurtosis detection, and use of T4 thresholds to detect and, where possible, mitigate RFI.

Radiometer L3 data can contain bit errors caused by noise in communication links and memory storage devices. The CCSDS packets include error-detecting Cyclic Redundancy Checks (CRCs), which the L1A processor uses to flag errors.

More information about error sources is provided in Section 4.6: Algorithm Error Performance of the ATBD, O'Neill et al. 2018.

Background color on
Quality Assessment

For in-depth details regarding the quality of these data, refer to the following report:

Validated Assessment Report

Quality Overview

SMAP products provide multiple means to assess quality. Each product contains bit flags, uncertainty measures, and file-level metadata that provide quality information. For information regarding the specific bit flags, uncertainty measures, and file-level metadata contained in this product, refer to the Data Fields and Metadata Fields documents.

Each HDF5 file contains metadata with Quality Assessment (QA) metadata flags that are set by the Science Data Processing System (SDS) at the JPL prior to delivery to NSIDC. A separate metadata file with an .xml file extension is also delivered to NSIDC with the HDF5 file; it contains the same information as the file-level metadata.

A separate QA file with a .qa file extension is also associated with each data file. QA files are ASCII text files that contain statistical information in order to help users better assess the quality of the associated data file.

If a product does not fail QA, it is ready to be used for higher-level processing, browse generation, active science QA, archive, and distribution. If a product fails QA, it is never delivered to NSIDC DAAC.

6:00 p.m. Ascending Half Orbits

Data from both 6:00 a.m. descending and 6:00 p.m. ascending half-orbit passes are used as input for soil moisture derivation in this Version 5 Validated product. However, the radiometer soil moisture algorithm assumes that the air, vegetation, and near-surface soil are in thermal equilibrium in the early morning hours; thus, retrievals from 6:00 p.m. ascending half-orbit passes may show a slight degradation in quality. Nonetheless, ubRMSE (unbiased root mean square error) and correlation of the p.m. and a.m. retrievals are relatively close. 

Data Flags

Bit flags generated from input SMAP data and ancillary data are also employed to help determine the quality of the retrievals. Ancillary data help determine either specific aspects of the processing (such as corrections for transient water) or the quality of the retrievals (e.g. precipitation flag). These flags will provide information as to whether the ground is frozen, snow-covered, or flooded, or whether it is actively precipitating at the time of the satellite overpass. Other flags will indicate whether masks for steeply sloped topography, or for urban, heavily forested, or permanent snow/ice areas are in effect.

For a description of the data flag types and methods of flagging, refer to the Data Flags section in the SPL2SMP user guide. All flags in SPL2SMP are carried over into the SPL3SMP product.

Background color on

References and Related Publications

Contacts and Acknowledgments

Investigators

Peggy O'Neill
NASA Goddard Space Flight Center
Global Modeling and Assimilation Office
Mail Code 610.1
8800 Greenbelt Rd.
Greenbelt, MD 20771 USA

Steven Chan
Jet Propulsion Laboratory
4800 Oak Grove Drive 
Pasadena, CA 91109 USA

Tom Jackson
United States Department of Agriculture/Agricultural Research Service (USDA/ARS) 
Hydrology and Remote Sensing Laboratory
104 Bldg. 007, BARC-West 
Beltsville, MD 20705 USA

Rajat Bindlish
NASA Goddard Space Flight Center
Hydrological Sciences Laboratory
8800 Greenbelt Rd.
Greenbelt, MD 20771 USA

Document Information

Document Creation Date

December 2016

Document Revision Date

June 2018

FAQ

What are the latencies for SMAP radiometer data sets?
The following table describes both the required and actual latencies for the different SMAP radiometer data sets. Latency is defined as the time (# days, hh:mm:ss) from data acquisition to product generation. Short name Title Latency Required Actual (mean1) SPL1AP SMAP L1A... read more
What data subsetting, reformatting, and reprojection services are available for SMAP data?
The following table describes the data subsetting, reformatting, and reprojection services that are currently available for SMAP data via the NASA Earthdata Search tool. Short name Title Subsetting... read more

How To

How do I programmatically request data services such as subsetting, reformatting, and reprojection using an API?
The subsetting, reformatting, and reprojection services provided by NSIDC through NASA Earthdata Search can also be accessed programmatically as a synchronous REST interface. This programmatic access is provided via an HTTPS URL containing a series of... read more
How to import and geolocate SMAP Level-3 and Level-4 data in ENVI
The following are instructions on how to import and geolocate SMAP Level-3 Radiometer Soil Moisture HDF5 data in ENVI. Testing notes Software: ENVI Software version: 5.3 Platform: Windows 7 Data set: SMAP L3 Radiometer Global Daily 36 km EASE-Grid Soil... read more
How do I visualize SMAP data in Worldview?
This video tutorial provides step-by-step instructions on how to visualize SMAP data in Worldview (http://worldview.earthdata.nasa.gov/). NASA Worldview is a map-based application... read more
How do I search, order, and customize SMAP data using Earthdata Search?
This video tutorial and attached PDF document provide step-by-step instructions on how to search, order, and customize SMAP data using Earthdata Search (https://search.earthdata.nasa.... read more
How do I interpret the surface and quality flag information in the Level-2 and -3 passive soil moisture products?
SMAP data files contain rich quality information that can be useful for many data users. The retrieval quality flag and surface flag bit values and interpretations are documented in the respective product Data Fields pages: Level-2 soil moisture product (SPL2SMP)... read more
How to Import SMAP HDF Data Into ArcGIS
Selected SMAP L4, Version 4 HDF data (SPL4SMAU, SPL4SMGP, & SPL4SMLM) can be added to ArcGIS with a simple drag/drop or using the 'Add Data' function. These data can be imported and visualized but not geolocated. In order to import, project, and scale these data and other SMAP L3 and L4 HDF... read more
How do I access data using OPeNDAP?
Data can be programmatically accessed using NSIDC’s OPeNDAP Hyrax server, allowing you to reformat and subset data based on parameter and array index. For more information on OPeNDAP, including supported data sets and known issues, please see our OPeNDAP documentation: ... read more
How to extract point and area samples of SMAP data using AppEEARS
This step-by-step tutorial demonstrates how to access NASA SMAP data using the Application for Extracting and Exploring Analysis Ready Samples (AppEEARS). AppEEARS allows users to obtain and display point and area data using spatial, temporal, and layer subsets. SMAP data from NSIDC that are... read more