• For a list of known issues with this product, see the Known Issues document under the Documentation section of the page.

ATLAS/ICESat-2 L3A Along Track Inland Surface Water Data, Version 4
Data set id:
ATL13
DOI: 10.5067/ATLAS/ATL13.004
There is a more recent version of these data.
Version Summary
Changes for this version include:

  • Implemented retention of unused photons associated with the same geolocation segment pulse ID and major frame ID (ph_id_pulse, pce_mframe_cnt) across ATL13 segments/transects.

  • Implemented exclusion of TEP photon events when forming ATL13 short segments.

  • Implemented computation of water surface spectral moments and spectral width. The spectral width flag (qf_spec_width) is now reported on the ATL13 product.

  • Fixed errors related to the identification of photons necessary to define valid crests and upcrossings for the computation of the spectral width parameter and electromagnetic bias (segment_bias_em).

  • Updated source code for a sign change to compute electromagnetic bias (segment_bias_em) as a positive expression.

  • Filtered geolocation segments whose composite POD/PPD flag is non-zero, invalidating possibly degraded geolocation solutions.

  • Updated weak beam interpolation of ATL09 strong beam atmospheric profile source data (e.g. cloud_flag_atm) to be aligned by along-track segment (segment_id) and not time.

  • Added short segment fractions of near and full saturation, computed from a weighted average of nearly and fully saturated fractions of pulses within ATL03 geo-segments overlapping the segment.

  • Added DEM height & source at the short segment rate, based on DEM heights and sources of ATL03 reference photons of all geolocation segments overlapping the short segment.

  • The ATL03 EGM2008 geoid is now reported in the tide free system. Implemented updates to WGS-84 ellipsoid photon heights to re-reference the mean tide system geoid when forming orthometric height, using geoid_free2mean.

  • Implemented computation of height adjustment to be applied to the apparent surface height to account for deconvolution analysis, and added a flag representing the range of long segment height adjustment values (qf_ht_adj).

  • Both the first photon bias correction (segment_fpb_correction) and mean height adjustment estimated from deconvolution are now applied to the observed apparent surface height (segment_apparent_height) when computing orthometric heights and heights referenced to the WGS-84 ellipsoid (ht_ortho & ht_water_surf).

  • Implemented updates to ATL13 short segment along-track water body surface slope (segment_slope_trk_bdy) to include spacecraft velocity in its derivation.

  • Added additional tiers to the flag that indicates the range of long segment lengths (qf_lseg_length).

  • Implemented exclusion of very long (L_sub_ID) segments associated with insufficient photon counts within the range of subsurface fit from contributing to the exponential fit to the observed histogram.

  • Made anomalous short-segment information available in a separate subgroup, anom_ssegs, populated with output parameters such as water body reference ID, standard deviation of signal photon heights per segment and coarse water height (atl13refid, anom_sseg_stdev & coarse_transect_ht) for segments deemed anomalous within each body transect.

  • Implemented ingestion of ATL03 quality_ph (at photon rate) and computation of short segment photon counts designated at each quality level (as described by elements of the dimension scale vector /ds_sseg_quality) as a rank 2 array for both anomalous & non-anomalous segments (segment_quality & anom_sseg_quality).

  • The short segment anomaly testing is now inclusive of all anomaly tests. Within the anom_ssegs subgroup, the trigger flag anom_sseg_trigger_flag has been implemented as a rank 2 array, where the magnitude of each row element indicates result of anomaly testing from a specific cause for a given segment, as described by elements of the dimension scale vector /ds_anom_trigger.

  • Added anomalous short segment averaged coordinates and length based on endpoint locations with the anom_ssegs subgroup.

Overview

This data set (ATL13) contains along-track surface water products for inland water bodies. Inland water bodies include lakes, reservoirs, rivers, bays, estuaries and a 7km near-shore buffer. Principal data products include the along-track water surface height and standard deviation, subsurface signal (532 nm) attenuation, significant wave height, wind speed, and coarse depth to bottom topography (where data permit).
Parameter(s):
ELEVATION
Platform(s):
ICESat-2
Sensor(s):
ATLAS
Data Format(s):
HDF5
Temporal Coverage:
13 October 2018 to 15 July 2021
Temporal Resolution:
  • 91 day
Spatial Resolution:
  • Not Specified
Spatial Reference System(s):
WGS 84
EPSG:4326
Spatial Coverage:
N:
90
S:
-90
E:
180
W:
-180
Blue outlined yellow areas on the map below indicate the spatial coverage for this data set.

Data Access & Tools

This data set has been retired. There is a more recent version of these data.

Help Articles

General Questions & FAQs

This article covers frequently asked questions about the NASA NSIDC DAAC's Earthdata cloud migration project and what it means to data users.
This short article describes the customization services available for ICESat-2 data using Earthdata Search.

How to Articles

Many NSIDC DAAC data sets can be accessed using the NSIDC DAAC's Data Access Tool. This tool provides the ability to search and filter data with spatial and temporal constraints using a map-based interface.Users have the option to
To convert HDF5 files into binary format you will need to use the h5dump utility, which is part of the HDF5 distribution available from the HDF Group. How you install HDF5 depends on your operating system.
Learn the basic steps for using OpenAltimetry to browse and download ICESat-2 data products.
This guide will provide an overview of the altimetry measurements and data sets across the missions, as well as a guide for accessing the data through NASA Earthdata Search and programmatically using an Application Programming Interface (API).
The NASA Earthdata Cloud is the NASA cloud-based archive of Earth observations. It is hosted by Amazon Web Services (AWS). Learn how to find and access NSIDC DAAC data directly in the cloud.
All data from the NASA National Snow and Ice Data Center Distributed Active Archive Center (NSIDC DAAC) can be accessed directly from our HTTPS file system, using wget or curl. Basic command line instructions are provided in the article below. 
NASA Earthdata Search is a map-based interface where a user can search for Earth science data, filter results based on spatial and temporal constraints, and order data with customizations including re-formatting, re-projecting, and spatial and parameter subsetting.
This webinar introduces the ICESat-2 mission and shows you how to explore, access and customize ICESat-2 data with the OpenAltimetry application, using NSIDC DAAC tools, and shows you how to subset, reformat and analyze the data using Python.