• For a list of known issues with this product, see the Known Issues document under the Documentation section of the page.

ATLAS/ICESat-2 L3A Inland Water Surface Height, Version 3
Data set id:
ATL13
DOI: 10.5067/ATLAS/ATL13.003
There is a more recent version of these data.
Version Summary
Changes for this version include:

  • The water body shape file has been updated to include improved river shapes (see Section 3.6, ATBD for ATL13).

  • The first photon bias (FPB) correction has been implemented to calculate the apparent width of the full-width at half-max (FWHX) standard deviation of the ATL13 surface (see "Section 4.7.3.6 | First photon bias correction" in the ATBD for ATL13), the apparent strength, and the average detector time. This bug fix improves surface retrievals, especially for highly specular water surfaces.

  • Implemented an estimate of short segment wind speed from ATL09 input wind vector components at 10m, interpolated to short segment index photon times (gt[x]/met_wind10_atl09); and derived standard deviation of water surface at the long segment rate (gt[x]/met_wind10_atl13).

  • Using a previously identified water body bottom, implemented a minimum height for the range over which to perform the subsurface deconvolution and the bottom height of the vertical profile for long segments. This improves subsurface attenuation when the bottom is detected.

  • The threshold procedure that tests photon counts within short-segment histogram multimode bins against sseg_mode_cnt_test, to determine whether to include/exclude from the segment, has been updated to use the standard deviation of signal photon heights per shot segment (sseg_stdev). This bug fix addresses bias due to the removal of ATL13 outputs in the case of large wave heights.

  • The value of ancillary_data/inland_water/geoseg_edge_buffer is now selected based on the type and size of a given water body. This change fixes a bug in previous versions and improves the identification of shorelines (see "4.3.1 | Photons contributing to the water surface height," ATBD for ATL13).

  • Added a parameter in the water surface height computation that incorporates the maximum available geolocation segments from ATL03, as indicated by geoseg_edge_buffer (default = 5), that lie outside both lake mask edge crossings (added for use in future products currently under development).

  • Changed the sign for electromagnetic bias (H_bias_EM). This fixes a bug in previous versions.

  • The expression for orthometric water surface height (equations 4.23 and 4.24, ATBD for ATL13) and depth from the mean water surface to the detected bottom have been updated to exclude H_bias_EM, when it is designated as invalid, and H_bias_fit is designated as valid. This update improves this special case.

  • Implemented a new scheme that removes misidentified water surfaces due to near-shore influences. After testing that a valid number of short segments have passed all other anomaly testing (valid_sseg_count), and determining the maximum length of a short segment that can be marked as anomalous due to shore buffering (shore_buff_sseg_length), the number of short segments to be designated as anomalous, due to near-shore influences (shore_buffer), is implemented as a 9x9 matrix that depends on water body type and size.

  • Cloud confidence flag parameters gt[x]/cloud_flag_atm_atl09, gt[x]/cloud_flag_asr_atl09, and gt[x]/layer_flag_atl09 are now retrieved from the ATL09 product and reported on ATL13 at the short segment rate using nearest neighbor interpolation. This was added to help analyze and better understand short-segment data products.

  • Implemented surface (skin) temperature (gt[x]/met_ts_atl09) and NOAA snow/ice flag (gt[x]/snow_ice_atl09) at the short segment rate, derived by interpolation/resampling ATL09 inputs (met_ts and snow_ice) at the 1 Hz and 25 Hz rates. These parameters were added to help analyze and improve overall understanding of short-segment data products.

  • Added six water body transect parameters to gt[x]/ (transect_id; sseg_start_lat; sseg_start_lon; sseg_end_lat; sseg_end_lon; and segment_azimuth) which will be used by future inland water body products, currently in development.

Overview

This data set (ATL13) contains along-track water surface heights and descriptive statistics for inland water bodies. Water bodies include lakes, reservoirs, bays, and estuaries. Descriptive statistics include along-track surface slope (where data permit), mean and standard deviation, subsurface signal (532 nm) attenuation, wave height, and coarse depth to bottom topography.
Parameter(s):
ELEVATION
Platform(s):
ICESat-2
Sensor(s):
ATLAS
Data Format(s):
HDF5
Temporal Coverage:
13 October 2018 to 11 November 2020
Temporal Resolution:
  • 91 day
Spatial Resolution:
  • Not Specified
Spatial Reference System(s):
WGS 84
EPSG:4326
Spatial Coverage:
N:
90
S:
-90
E:
180
W:
-180
Blue outlined yellow areas on the map below indicate the spatial coverage for this data set.

Data Access & Tools

This data set has been retired. There is a more recent version of these data.

Help Articles

General Questions & FAQs

This article covers frequently asked questions about the NASA NSIDC DAAC's Earthdata cloud migration project and what it means to data users.
This short article describes the customization services available for ICESat-2 data using Earthdata Search.

How to Articles

Many NSIDC DAAC data sets can be accessed using the NSIDC DAAC's Data Access Tool. This tool provides the ability to search and filter data with spatial and temporal constraints using a map-based interface.Users have the option to
To convert HDF5 files into binary format you will need to use the h5dump utility, which is part of the HDF5 distribution available from the HDF Group. How you install HDF5 depends on your operating system.
Learn the basic steps for using OpenAltimetry to browse and download ICESat-2 data products.
This guide will provide an overview of the altimetry measurements and data sets across the missions, as well as a guide for accessing the data through NASA Earthdata Search and programmatically using an Application Programming Interface (API).
The NASA Earthdata Cloud is the NASA cloud-based archive of Earth observations. It is hosted by Amazon Web Services (AWS). Learn how to find and access NSIDC DAAC data directly in the cloud.
All data from the NASA National Snow and Ice Data Center Distributed Active Archive Center (NSIDC DAAC) can be accessed directly from our HTTPS file system, using wget or curl. Basic command line instructions are provided in the article below. 
NASA Earthdata Search is a map-based interface where a user can search for Earth science data, filter results based on spatial and temporal constraints, and order data with customizations including re-formatting, re-projecting, and spatial and parameter subsetting.
This webinar introduces the ICESat-2 mission and shows you how to explore, access and customize ICESat-2 data with the OpenAltimetry application, using NSIDC DAAC tools, and shows you how to subset, reformat and analyze the data using Python.