• For a list of known issues with this product, see the Known Issues document under the Documentation section of the page.

ATLAS/ICESat-2 L3A Ocean Surface Height, Version 4
Data set id:
ATL12
DOI: 10.5067/ATLAS/ATL12.004
There is a more recent version of these data.
Version Summary
Changes for this version include:

  • Implemented the usage of the ATL03 orbit and pointing flag (podppd_flag) to only process data with podppd_flag=0. This is done to avoid putting out bad sea surface heights when the underlying pointing and position data are bad.

  • Updated the moving average process to consider photons with signal confidence 3 and 4 to be consistent with the ATBD.

  • Aligned the atmosphere data (layer_flag) collected only for the strong beams by segment_id for the processing of weak beam data.

  • Changed from surface finding based on the distribution of photon heights to surface finding based on the photon height anomaly relative to a moving bin average of high confidence photon heights. This is done to exclude subsurface returns under the crests of surface waves that otherwise fall inside the histogram of true surface heights. Added control variables (Table 5 of ATBD) conf_lim, the limiting confidence level to be included in the moving bin average, nphoton, the number of photons either side of a central photon to be included in the moving bin average, e.g., for nphoton=10, a 21 point average is used.

  • Computed nharms harmonic coefficients, a, and SNR, snr, of along-track heights. These are added features to characterize the surface wave environment in each ocean segment as harmonic coefficients versus wave numbers, wn, in the along-track direction (wave direction is not accounted for at this time).

  • Computed correlation length scale from 10-m bin averaged heights, l_scale, the corresponding degrees of freedom, np_effect, and resultant uncertainty, h_uncrtn, in the estimated sea surface heights. This is to provide an uncertainty estimate for average height over an ocean segment that accounts for the lack of statistical independence between photon heights over surface waves.

  • Updated to process only data with quality_ph equal to zero to avoid outputting surface heights based on poor quality photon heights as determined in ATL03.

Overview

As of 23 September 2022, this data set is retired and no longer available for download. Per our agreement with the data provider, NSIDC only archives the most recent version of each of the ICESat-2 standard products and the version that preceded it. The most recent version is available from https://nsidc.org/data/icesat-2/data-sets

This data set (ATL12) contains along-track sea surface heights at variable length scales over cloud-free regions. Estimates of height distributions, surface roughness, surface slope, and apparent reflectance are also provided. The data were acquired by the Advanced Topographic Laser Altimeter System (ATLAS) instrument on board the Ice, Cloud and land Elevation Satellite-2 (ICESat-2) observatory.
Parameter(s):
SEA SURFACE HEIGHT
Platform(s):
ICESat-2
Sensor(s):
ATLAS
Data Format(s):
HDF5
Temporal Coverage:
13 October 2018 to 15 July 2021
Temporal Resolution:
  • 91 day
Spatial Resolution:
  • Not Specified
Spatial Reference System(s):
WGS 84
EPSG:4326
Spatial Coverage:
N:
90
S:
-90
E:
180
W:
-180
Blue outlined yellow areas on the map below indicate the spatial coverage for this data set.

Data Access & Tools

This data set has been retired. There is a more recent version of these data.

Help Articles

General Questions & FAQs

This article covers frequently asked questions about the NASA NSIDC DAAC's Earthdata cloud migration project and what it means to data users.
This short article describes the customization services available for ICESat-2 data using Earthdata Search.

How to Articles

Many NSIDC DAAC data sets can be accessed using the NSIDC DAAC's Data Access Tool. This tool provides the ability to search and filter data with spatial and temporal constraints using a map-based interface.Users have the option to
To convert HDF5 files into binary format you will need to use the h5dump utility, which is part of the HDF5 distribution available from the HDF Group. How you install HDF5 depends on your operating system.
Learn the basic steps for using OpenAltimetry to browse and download ICESat-2 data products.
This guide will provide an overview of the altimetry measurements and data sets across the missions, as well as a guide for accessing the data through NASA Earthdata Search and programmatically using an Application Programming Interface (API).
The NASA Earthdata Cloud is the NASA cloud-based archive of Earth observations. It is hosted by Amazon Web Services (AWS). Learn how to find and access NSIDC DAAC data directly in the cloud.
All data from the NASA National Snow and Ice Data Center Distributed Active Archive Center (NSIDC DAAC) can be accessed directly from our HTTPS file system, using wget or curl. Basic command line instructions are provided in the article below. 
NASA Earthdata Search is a map-based interface where a user can search for Earth science data, filter results based on spatial and temporal constraints, and order data with customizations including re-formatting, re-projecting, and spatial and parameter subsetting.
This webinar introduces the ICESat-2 mission and shows you how to explore, access and customize ICESat-2 data with the OpenAltimetry application, using NSIDC DAAC tools, and shows you how to subset, reformat and analyze the data using Python.